Sony DualShock 4
There are two models:
- v1
- The model number starts with
CUH-ZCT1
, followed by region letter(s). - Doesn’t work over USB, can only be used over Bluetooth.
- The rubber coating from the analog sticks degrades too quickly.
- The LED light bar is only visible from the back.
- Bluetooth version 2.1+EDR.
- The model number starts with
- v2
- The model number starts with
CUH-ZCT2
, followed by region letter(s). - Works both via USB and via Bluetooth.
- The LED light bar is visible from the top and from the back.
- Bluetooth version 4.0.
- The model number starts with
The information of this page is based on the second model (v2).
- Connections: Bluetooth and Micro-USB
- 3.5mm TRRS combo headset jack can be used when the controller is connected via USB
- Measured about 30ms of microphone delay.
- 3.65V 1000mAh battery
- Weight: 210g
- Vendor id:
054c
“Sony Interactive Entertainment” - Product id:
- v1:
05c4
“Wireless Controller” - v2:
09cc
“Wireless Controller”
- v1:
- Official manual:
- Third-pary documentation:
- https://www.pcgamingwiki.com/wiki/Controller:DualShock_4
- https://www.ifixit.com/Device/DualShock_4
- https://www.ifixit.com/Device/DualShock_4_CHU-ZCT2U
- https://wiki.archlinux.org/title/Gamepad#PlayStation_3/4_controller
- https://wiki.archlinux.org/title/Gamepad#Playstation_4_controllers
- https://github.com/chrippa/ds4drv
Power-on (Bluetooth)
Buttons | Action | LED light bar |
---|---|---|
Press PS button | Reconnect to the last device | Blinking white two times per second |
Hold PS+SHARE for 4s | Bluetooth pairing | Two short flashes per second |
Power-off
Hold the PS button from 8s to 15s to turn off the controller.
Factory reset
Insert a paper clip into a little hole on the bottom of the controller, next to a screw near the L2 trigger, and push the reset button for 5 seconds.